When you remove the original bumper off your truck or 4x4, there is a good chance that you've done so without providing any provisions for license plate lighting. Now, we'll admit that many guys we know (including ourselves) are running around without any lights on our plates. As much as we don't give a dang about this, the Law does. Therefore, we needed to find a quick, slick way to get some lighting onto our plates. DEI's Lite' N Boltz are a simple little kit to add some LED lighting to your license plate in an effort to keep you legal. Get some! It'll be one less thing that you're going to get pulled over for. The Lite' N Boltz kit is pretty simple. There are two milled steel housings with LED lights wired into them. They simply act as your top (or bottom if you prefer) license plate bolts and add light to your plate without you having to fab up some special light and mount. These little Lite' N Boltz might be useful for cool interior lighting as well.The Lite' N Boltz kit is pretty simple. There are two milled steel housings with LED light For display purposes, we have this LED light bolt flipped upside down so you can see the LED light. For use, you'd want this flipped towards the plate's face. There are simply a red (positive) wire and a black (ground) wire coming out the back. Chances are that your vehicle still has the license plate light harness zip-tied up under the frame. Fish those wires out and hook them up so those new LED lights light up with your taillights.For display purposes, we have this LED light bolt flipped upside down so you can see the L Sources Design Engineering 604 Moore Road Avon Lake OH 44012 800-264-9472 www.designengineering.com By Jerrod Jones Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!