If you ask us, the Polaris RZR-S is an incredible machine but lacks a few must-have items. How can you have an off-road vehicle capable of speeds over 60 mph with no front bumper for protection? Or how about that ugly stock gold shifter handle? As off-road enthusiasts neither of these are acceptable. We made a few phone calls and tracked down some inexpensive, easy-to-install goods for your ride.
 Central Coast Prerunners fabricates...  Central Coast Prerunners fabricates quality steel bumpers for nearly every SXS on the market. They are made of DOM steel and are plenty strong should you run into your friend ahead. The RZR bumper comes with an aluminum skidplate and two light mounts on the top bar. |  The install is very tight...  The install is very tight and the bumper hugs the vehicle closely. Nobody wants a big cowcatcher on the front of their ride. The install took all of 20 minutes as the bumper bolts into stock frame mounts that are clearly visible with the front plastics removed. |  The only modification needed...  The only modification needed to install the bumper is the removal of the center plastic section in front. You can see here highlighted in red. It is easily removed with a screwdriver. |
 Accutronix Offroad sent us...  Accutronix Offroad sent us their "Elite" RZR Shift Arm with knob to install and bring much needed bling to our project. The stock shifter is rather boring ... and zinc colored. Seriously, Polaris-no billet?! The top of the shifter knob pops off and hidden beneath is a screw holding the knob to the arm. Remove the knob and then remove the center console that is attached to the floor. This should take you no longer than 10 minutes. |  With everything removed you...  With everything removed you can see how the shifters are swapped. Remove the lower bolt and the center pin and install your new billet arm. |  Our new arm is CNC Machined...  Our new arm is CNC Machined from 6061 T-6 Billet aluminum. It will last forever and looks great and matches the rest of the vehicle much better. |