Off-Roadweb Magazine Homepage Off-Road

0406or Bedcage11 Z

Prev Next
<b>11.</b> Next, a pair of tubes was welded between the perimeter of the 'cage in the shape of an X. This X gives the 'cage lateral support. The new Sway-A-Way bypass dampers were mocked up above the axle so that James could design the upper mounts.
Bedcage Building Basics

 11. Next, a pair of tubes was welded between the perimeter of the 'cage in the shape of an X. This X gives the 'cage lateral support. The new Sway-A-Way bypass dampers were mocked up above the axle so that James could design the upper mounts.  View Related Article

 

Get Adobe Flash player

Car Research Guide