Off-Roadweb Magazine Homepage Off-Road

0402or Bashguard06 Z

Prev Next
6. The opposite end of the tubing is cut at a 25-degree angle and then MIG-welded to the end of the framerail. A duplicate piece of tubing is fabricated and then welded to the other 'rail.
Bash Guard

 6. The opposite end of the tubing is cut at a 25-degree angle and then MIG-welded to the end of the framerail. A duplicate piece of tubing is fabricated and then welded to the other 'rail.  View Related Article

 

Get Adobe Flash player

Car Research Guide