Old Chevy, New Zone Suspension
There are plenty of straight-axle Chevy 4x4s still driving around in our neck of the woods, and we bet there are plenty of them in yours, too. Zone Offroad now has a four-inch suspension system that lets these classic trucks run 33-inch tires without any other modifications. Applications are 1977-1987 Chevy/GMC 1/2-ton and 3/4-ton 4x4s.
• Kit includes front springs, rear lift blocks, shocks, U-bolts, a raised steering arm, and brake line relocation brackets
• Front springs include anti-friction pads for smooth, bind-free suspension cycling
For more information contact:
Zone Offroad
(888) 998-ZONE
Zoneoffroad.com
Doc’s Kustom Tanks
Doc’s Kustom now has a gas tank manufacturing division that is appropriately named Kustom Tanks. Kustom Tanks keeps a variety of pre-made tanks in stock, but naturally speaks the language of custom. If you need a special configuration, simply tell Kustom Tanks what you’re after and they’ll handle the rest.
• All tanks are made in-house from 5052 aluminum, are internally baffled, and fully pressure-tested. A free fuel level sender is included with every tank.
• All tanks come with a sender ring, filler neck, internal pickup tube, and a rollover valve. An optional fuel injection module is also available that features a high-performance fuel pump.
For more information, contact:
Doc’s Kustom
(229) 528-4300
Docskustom.com
Solo Motorsports Toyota Lift Spindles
If you need more ground clearance and tire clearance for your ’96-to-’04 Tacoma, ’00-to-’06 Tundra Access Cab or Double Cab, or your ’96-to-’02 4Runner, Solo Motorsports now has a fully fabricated spindle (AKA steering knuckle) to fill your needs.
• This is for 2WD applications only. New unit bearing hubs come pre-installed. It can be used with factory or aftermarket coilover shocks, and allows fitment of up to 35-inch tires on most models. Fiberglass fenders may be required.
• Designed to be used with aftermarket upper control arms that feature a one-inch uniball. Produces a 3-inch lift and increases track width by 1 7/8 inches per side. This fully fabricated lift spindle is much stronger than stock.
For more information, contact:
Solo Motorsports
(626) 966-7656
Solomotorsports.com