Realm of the Raptor
Didn’t buy an SVT Raptor? You can still obtain Raptor-like performance for your standard-issue 2009-to-2011 F-150 by bolting on Camburg’s F-150 Coilover Performance System.
• This system gives you 40 percent more front-wheel travel than stock, bringing the total to 10 inches of custom-valved coilover-based front travel. The stock Raptor has just over 11 inches of travel up front.
• It includes a pair of 2.5-inch diameter Fox front coilvers, a pair of Camburg front upper control arms, and a pair of Fox 2.5-inch diameter rear piggyback shocks. The system’s bolt-on installation lets you transform your truck in an afternoon.
For more information, contact:
Camburg
(714) 848-8880
Camburg.com
Daystar Hood Pin Kits
Pin-and-grommet systems are the best way to keep a heavy hood in place over rough terrain. Daystar now offers a hood-pin kit that works great with steel and fiberglass hoods alike.
• Includes a 5/8-inch diameter hood pin, stainless steel fasteners, retaining clip, and a urethane grommet
• Sold individually since different hoods require different numbers of hood pins. Color choices are black, red, and blue.
For more information, contact:
Daystar
(800) 595-7659
Daystarweb.com
Clear 37s
Trail Master’s latest suspension system for the 2008-to-2011 Ford Super Duty 4x4 features proper suspension geometry for confident handling on- or off-road.
• Six-inch lift height clears 37-inch tires
• System includes tubular replacement radius arms, application-tunes shocks, and Kevlar brake hoses as well as many other features
For more information, contact:
Trail Master Suspension
(928) 636-7080
P-A-G.net
Toyota Full-Floater Axle Shafts
Toyota’s full-floating rear axles are usually found under FZJ80 Land Cruisers and dually pickups from the factory, but they make great swap-in candidates into other vehicles. The factory 30-spline full-floater axle shafts are tough units, but you can do one better by installing Nitro Gear & Axle’s chromoly ’shafts.
• High-strength chromoly material is crafted into a finished product using state-of-the-art machining, heat treating, and polishing
• Stock-length as well as cut-to-length ‘shafts are available to suit a variety of applications
For more information, contact:
Nitro Axle & Gear, available through JT’s Parts & Accessories
(509) 888-2953
Justdifferentials.com