ATS Twin Pump System for the 2007-and-Newer 6.7L Cummins
The ATS twin pump system adds a second fuel pump to work in series with the original factory fuel pump.
Benefits include increased power, better durability, improved throttle response, and higher fuel economy.
The ATS Twin Pump system includes a pump, pulley, mounting bracket, electronic controller, coolant re-routing hose, drive belt, and all associated mounting hardware. No fabrication is required to install.
For More Information, Contact: ATS Diesel Performance (800) 949-6002 www.atsdiesel.com
Hobart Welding Gear
Leather aprons and jackets protect from heat and sparks when doing heavy work.
Flame retardant cotton works well for protection in hot weather or when performing lighter-duty work.
Hobart also offers a line of welding gloves, caps, and do-rags.
For More Information, Contact: Hobart Welders (800) 626-9420 www.hobartwelders.com
Easy EFI Conversion
Replaces the carburetor with a self-contained EFI system.Easy to tune and does not require a laptop for calibration.Includes throttle body, ECU, wide-band oxygen sensor, wiring harness, fuel injectors, fuel pump kit, and other small parts for a complete installation.
For More Information, Contact: F.A.S.T. (Fuel Air Spark Technology) (877) 334-8355 www.fuelairspark.com
Triple D Induction Ford AeroRam Intake Manifold
Fits Ford 289-302-based small block and 351 Windsor-based engines.
Available with your choice of Barry Grant's BadMan Inline four-barrel, three, four, or six Demon "98" carburetors, three SixShooter two-barrel carbs, or dual or single Quad carburetors.
Tuned, equal-length runners keep cylinders working in unison for increased power up to 6,500 rpm.
For More Information, Contact: Barry Grant, Inc. (706) 864-8544 www.barrygrant.com
True Flow XDI Intakes
Available for a variety of applications.
Gain up to 27 hp, 62 lb-ft of torque depending on application.
Gain up to 50-percent greater air flow.
Includes True Flow's premium air filter for superior engine protection.
Jeep Wrangler TJ application shown.
For More Information, Contact: True Flow (866) 999-9098 www.trueflow.com
Currie F9 Fabricated Housing Center
Available as a complete rearend, or as a component for builders.
Exclusive design provides maximum ground clearance at all pinion angles.
3/16-inch thick Hi-Form 50 steel body.
3/8-inch thick Hi-Form 50 steel third member mounting face.Machined to fit 3 or 31/4-inch tubes.
Internal welded-in bulkheads tie the face, body, and inner ends of the tubes together.
Back brace kits also available.
For More Information, Contact: Currie Enterprises (714) 528-6957 www.currieenterprises.com
KC HiLites Tube Clamp Mount
Securely clamps onto round tubing.
Use to mount lights or other accessories.
Competition-proven at the 2009 BITD Parker 425.
Constructed of injection-molded glass-filled nylon composite.
Will not rust.
Made in the USA.
For More Information, Contact: KC HiLites (928) 635-2607 www.kchilites.com
Poly Performance Double Adjuster Tube Adapter
Fine-tune steering and suspension link geometry without removing any components.
Secure pinch-bolt design resists loosening better than jam nuts.
Welds on to the tube, and thereby seals it against water and debris intrusion.
Simply loosen the pinch bolts, turn the adjuster as needed, re-tighten the pinch bolts, and you're done.
For More Information, Contact: Poly Performance (805) 783-2060 www.polyperformance.com
Rough Country '05-'07 Ford F-250, F-350 Super Duty 4WD 6-inch Radius Drop System
Run 37-inch tires with this system.
Includes shocks, Luxury Ride coil springs, radius arm and track bar drop brackets, dropped pitman arm, rear blocks, rear add-a-leaf system, and rear U-bolts.
Coil spring rates are specifically designed for gas or diesel engines.
For More Information, Contact: Rough Country Suspension Systems (800) 222-7023 www.roughcountry.com
S.I. Motorsports Fabricated Spindles For Kingpin I-Beam Systems
King Pin spindles are designed to replace all variations of cast spindles on Ford 1-inch king pin I-beams assemblies and are CNC machined from solid 4130 chromoly steel for exceptional strength and durability.
Designed for a standard eight-degree king pin inclination, but can be machined up to two degrees in either direction to correct camber and alignment issues.
Utilize a standard Dana 44 bolt pattern on the spindle face to accommodate any budget, with options ranging from a standard 4WD F-150 snout-and-hub assembly to a 2- or 21/2-inch billet hub assembly.
Your choice of lug patterns.
A bolt-on caliper mount is included, with an option of either 12-or 14-inch rotors.
Designed to accept factory bushings and seal caps for ease of installation and maintenance.
For More Information, Contact: S.I. Motorsports (562) 903-1625 www.simotorsportsinc.com
Sultans Of Spark
Sultans of Spark coil-on-plug coil packs are built for the Ford 4.6L and 5.4L modular engines.
Increased windings boost spark output to 40,000 volts compared to the 25,000 volts produced by stock coils.Unlike other coils, the higher voltage generated by the S.O.S. system does not drop while accelerating or under load. This characteristic allows you to run a wider spark plug gap.
Spark plug gap can be increased to 0.065-inch which burns fuel more completely.
High-quality thermal epoxy is used to resist vibration.Super dielectric material is used to withstand high engine temperatures.
S.O.S. coils are available in sets or individually.
For More Information, Contact: Performance Distributors (901) 396-5782 www.performancedistributors.com
Fourtreks Billet Shovel Mounts
Modular system that clamps to roll cages, bumpers, and other round tubing.
Billet aluminum tube clamps, UV resistant rubber, and stainless steel hardware combine to form a long-lasting product.
Available in a variety of popular diameters.
Easily and securely mounts shovels, axles, floor jack handles, etc.
For More Information, Contact: Four Treks (818) 517-6145 www.fourtreks.com
Ultimate Air FloTech FX1500 Regulator
High flow regulator fixed at 150 psi.
Built-in safety relief valve.
'Never lose' washer and automatic quick-disconnect coupler allow one-handed operation.
Built for punishing environments and backed up with a limited lifetime warranty.
For More Information, Contact: Ultimate Air (313) 595-5358 www.ultimate-air.com