Prerunner Truck Buyer's Guide

Camburg Engineering A-arm Ford F-150 Kit
Camburg's prerunner suspension kit has been designed for all '97-'03 Ford F-150 trucks. Utilizing the same technology as full-on race trucks, the suspension features billet aluminum hubs with 2-inch bearings, billet aluminum upper A-arms, and fully boxed and internally plated lower arms with 1.5-inch uniball joints.The steering components are also built with durability in mind, as exhibited by the Heim joint ends and DOM tubing.

P.C.I. Race Radios 4-Link PRO Prerunner Intercom System
The new 4-Link Pro intercom system is compatible with many of the most popular mobile or handheld radios found in prerunners. A simple 12V power input is all that's required, along with the required headsets, for near perfect communications while on the trail. Additional creature comforts such as adjustable volume and a music interface are standard with the system. The system is compatible with helmets as well, and the option of recording voice transmissions is available also.

Pro Comp Off-Road Deep-Cycle Battery
Pro Comp's newest line of batteries has been designed with prerunning in mind. Given the uneven terrain encountered while prerunning, Pro Comp batteries have been designed with advanced technology grids that contain proprietary grids made of high-purity lead-tin alloy. When combined with the advanced spiral-wound cell design, these durable, corrosion-resistant grids deliver superior performance and durability.
In addition to the quality internal construction, each battery contains two sets of terminals. The centered top terminal location enables installation in normal and reverse terminal applications, while the side terminals can be used for the attachment of auxiliary equipment, such as lights, winches, and so on. Each battery contains 770 CCA and over 100 minutes of reserve capacity.

Hannemann Fiberglass Fenders
For over 30 years, the Hannemann name has been on prerunner fenders for virtually every type of truck around. Each pair of hand-laid fiberglass fenders is constructed with 3 ounces of mat material and 6 ounces of fiber cloth. The end result is a pair of fenders that will stand up to major off-road punishment. As part of the construction, the fenders are gelcoated and available standard in either white or black with custom colors also available.

Simpson Shark Air Inforcer Helmet
Designed after one the most popular helmets made by Simpson, the Shark Air Inforcer features an innovative top-forced air system for directing air to the face. The Air Inforcer is designed for in-car fresh air systems, providing maximum airflow where seat and headroom are at a premium. The lightweight carbon-fiber, Kevlar, and fiberglass composite shell contains an EPS liner with form-fitting, CarbonX fire-retardant lining for the ultimate in safety.
The helmet is Snell 2005-certified and is made in the USA. For added performance to the built-in air system, the chin flap creates positive pressure to eliminate any contaminated air from entering the helmet and to keep shield fogging to a minimum.