Fast Billet Throttle Bodies-78mm and 90mmFast, a division of the COMP Group, has just released its new line of high-flow billet throttle bodies. The new throttle bodies are available in 78mm & 90mm configurations and were designed for the new LSX polymer intake manifold. Beyond the LSX intake, the FAST 78mm throttle body can also be used with other Gen III intakes, including the stock intake manifold. These throttle bodies utilize the latest computer modeling software and real-world testing to produce designs that yield the maximum flow per square inch of cross-sectional area. All FAST throttle bodies are machined from super-strong 6061-T6 billet aluminum on precision CNC-machining centers for consistent quality and light weight.
For more information, contact Fuel Air Spark Technology, Dept. OR, (662) 224-3495, www.fuelairspark.com.
Holley Truck Avenger 470cfm CarburetorIt has happened to all of us at one time or another-our carbureted truck becomes stalled as soon as the tires enter the rough stuff. With nothing left to do, countless hours are spent throughout the day emptying the fuel bowl and trying not to flood the device any more than is necessary. Finally there is a carburetor that has been specifically designed to handle the 45-degree inclines and 30-degree side-to-side angles encountered while off-roading. The Avenger carburetor is available for many makes and models and is the perfect choice for small six-cylinder engines or behemoth V-8 powerplants.
For more information, contact Holley Performance Products, Dept. OR, 1801 Russellville Rd., Bowling Green, KY 42101, (270) 780-1824, www.holley.com.
Airaid 600-Series Dodge Cummins Turbo Diesel Quick-Fit Intake SystemThe Airaid Quick-Fit intake system for all 600-Series Dodge Cummins turbodiesel engines replaces the factory airbox lid with a high-flow, Synthaflow filter that has been designed to provide improved power and throttle response. The installation is completed in a matter of minutes, since this quality unit has been designed to meet OE standards.
For more information, contact Airaid Premium Filter Co., Dept. OR, 14840 N. 74th St., Scottsdale, AZ 85260-2405, (480) 443-3333, www.airaid.com.
Banks Power Transcommand Module For Ford Super-Duty TrucksThe Banks Power TransCommand Module is a high-end automatic-transmission management system capable of converting Ford E40Ds and 4R100s into Super-Duty units by continually corresponding shifts to power and load levels. This module is smooth, yet maintains a firm light-throttle shift, eliminating the soft, "car-like" shifts often associated with these units. Under heavy load driving or towing, the TransCommand delivers solid decisive shifts, while eliminating excessive slippage. Constructed of high-quality, high-temperature, solid-state components, this module will pay for itself after only a few uses, especially when compared with the years of life that it will add onto the transmission. Best of all, installation can be completed in just a few minutes.
For more information, contact Gale Banks Engineering, Dept. OR, 546 Duggan Ave., Azusa, CA 91702, (866) 438-7693, www.bankspower.com.
SLP Handheld PCM Programmer With Custom TuningSLP Performance introduces the Diablo custom-programming module. This portable, easy-to-use unit is available for all 6.0L Vortec V-8-equipped Chevrolet HD trucks. The Diablo allows the fine-tuning of a wide range of computer-controlled powertrain functions for maximum power increase (up to 20 hp at the wheels) and driveability. It's able to manipulate shift points and recalibrate rev limiters; correct your speedometer for nonstock gear ratios and tire sizes; boost transmission line pressure for firmer, more precise shifts; remove the factory top-speed governor; and more-all in minutes and at the touch of a button.
For more information, contact SLP Performance Parts, Dept. OR, 1501 Industrial Way N., Toms River, NJ 08755, (732) 349-2109, www.slponline.com.